Sunday 28 August 2011

Dad's Army 5 - Diorama 2

033 Dad's Army 5 - Diorama 2

I've been working on the diorama layout all week, with very little to show for it; there's not even been enough progress to generate any worthwhile photos.

So little progress, in fact, that I'm giving serious thought about reverting to Plan A, which was to just have the figures on the church hall floor. It may not look as good, but it will be done in time. Given some of the problems I'm encountering, I'm unlikely to have completed even the left wall of the full project any time soon.

This week was largely concerned with the office door in the left wall. I have cut out the door surrounds, and have both 2mm and 2.5mm deep versions. The wall is 1.5mm deep, so 2mm is probably the correct size. However, 2mm doesn't really protrude enough and I'm worried it will disappear when I paint the model. The surround edges were mitred by sanding the pieces on sandpaper, and they have actually turned out quite well.

I have cut out the space for the door. This was done by scraper and scalpel, as I couldn't get the scribe and snap approach to work. Unfortunately, the edges aren't quite as clean and square as I'd like, so there's a bit/lot more sanding to do.

I drew up a pattern for the panels of the door in InkScape and printed it out. Unfortunately, the sizes were all wrong, so I redid them by hand on paper, and then transferred the measurements to plasticard. I'm using 0.5mm for the plain back of the door and another 0.5mm piece for the panel section, although I'm not sure how easy cutting very small rectangles from 0.5mm plasticard will be.

I taped "The Godiva Affair" episode last weekend, and it has provided a wealth of new screen captures, including some areas I didn't have, such as the main door to the hall. However, the downside to this is that there now seems more work to do than ever. One small example is that I noticed the insets on the office door are arched at the top, not straight as I had thought. This isn't a big change, but will make cutting out the insets that bit more complicated.

A bigger thing that I noticed was that the bottom section of the walls the whole way around is actually wooden panels. This means I'll have to scribe each one, probably 2mm apart. Having only just recovered from scribing the floor, I'm not looking forward to this.

As a break from modelling, I managed to get my skeletons nearly finished, and have cleaned and undercoated my next group, Pig Iron Heavy Infantry Command Squad,  Wardroids, and a couple of Citadel Imperial Guard Walkers.

I'll decide at some point next week on whether I'm parking the diorama and just building the floor, but the smart money says that's the most sensible approach.

Sunday 21 August 2011

Dad's Army 4 - Diorama 1

032 Dad's Army 4 - Diorama 1

Just a quick update with some dodgy photos this week, as I'm spending all my time on the diorama. I wouldn't mind so much if I was making progress, but it's slow going.

The first picture is the cardboard mock-up I put together, to get an idea of what the size of the model would look like, and to see if it would be okay with all the figures in it, or if it would be too small/large.

Cardboard Layout

The rough positioning of the figures below was taken before I started painting anything. It's still largely what I'm planning to use, although Pike and Fraser won't be on the stage (I'm not building the stage)

Diorama Layout 1

The current plasticard layout, complete with test figures, is shown below. Nothing's glued yet, so I have plenty of time to move things about if required. The positioning of the back windows will be changing, hopefully sometime this week. The layout is populated with some Foundry Assyrians and Victorian hunters because a) I had them handy and b) they're the same size as the diorama figures.

Plasticard Layout

After a week, all I have to show for my time is:

  • the wall sections. The back wall required trimming, after I realised that I had to have the walls on top of the floor piece, rather than around the edge (the office door would have been dangling in mid-air if the walls were outside the floor)
  • the floor. This involved scribing 72 lines, each one 3mm apart. Each line took 10 shallow cuts, giving a total of 720 cuts. This took a full evening (I know you can get plasticard with these cuts; the problem is that the card isn't wide enough, and the cuts are the full length of the card, while I need them the full width)
  • outline of the left wall in InkScape. I obsessed over this to a worrying degree, trying to get every measurement perfect. The thing that tripped me up was that moving something 1mm looks huge when you're working at 300x magnification. However, when applied to the model, it's barely noticeable. I'm going to try and relax when doing future pieces
  • downloaded pictures of the posters that I'll need from a website. I haven't found portraits of the King and Queen yet, but I'm looking

The edges of the pieces aren't completely flat, due to the nature of working with plasticard (that's my excuse, and I'm sticking to it). I have sanded them down, but there's still a slight slope. It's not obvious when you look at it, but it will cause problems when I come to glue the pieces together. My plan to work around any problems caused by this gap is twofold:

  • use 4mm square rod to provide a surface for joining floor to wall and wall to wall
  • pin the walls to the floor for extra support. Pinning will involve drilling 0.5mm holes through the base and into the wall, then pinning with plasticard rod. It won't provide much strength, but should be enough to help keep the walls straight

Next week I will get to grips with the left wall and ideally get it finished. The door will be tricky, and there's a radiator to think about, but hopefully I'll start to see some progress.

If worst comes to worst, I can always just mount the figures on the floor, but I'm still hopeful that I'll get the model finished in time.

Sunday 14 August 2011

Dad's Army 3 - Civilians Finished

031 Dad's Army 3 - Civilians Finished

I finished the civilians for the Dad's Army diorama last week. I'm reasonably happy with them, some more so than others...

The weakest figures are Mrs Pike and Mr Blewitt, but, to be fair, these figures don't claim to represent those characters. The Mrs Pike figure was pushing a bicycle in the original pack, and looks like she was simply meant to be a British citizen helping fight the Nazi invaders. Mr Blewitt is a fairly generic "old bloke with a walking stick", so again, I can't really complain (not that that will stop me)

I'm happy with the blacks on the Warden, the Vicar and the Verger. I used the Andrea Miniatures Black set for those, and I'm finally starting to understand how the different shades/highlights behave.

The only one of this group with markings was the Warden, and I'm fairly happy with how they came out. It was quite warm while I was painting, so trying to do fine lines and writing before the paint dried on the brush was tricky.

Warden Front Warden Back

The figures that do represent characters on the show are very recognisable; it was just a shame that the casting of the figures was so poor.

Finished civilians

Civilians Group

Note - the damage to Mr Blewitt and Mrs Pike (hat brims on both models) occurred as I was photographing them. I knocked one over, and just as I was thinking "let's not do that again", I knocked the second one over :-(. The damage, however, has been repaired.

Diorama Layout

I have begun thinking about this and planning stuff out.

I'm setting it in the church hall, but the original idea of simply having them on the bare wooden floor has expanded to include the back wall and the wall with the office door in it.

I've been taking lots of screenshots from the DVDs, and each picture depresses me more. There is a lot of detail in the church hall set that I'd never noticed before: pictures, posters, benches, tables, a piano (on order from Dixon Miniatures) and flags, to name but a few.

The problem is that I've never really done a diorama, or a scratchbuild of this complexity, before, and this strikes me as jumping in at the deep end. However, I've started to decide on some measurements and have picked up plenty of plasticard and foam-card (I'm expecting to make lots of mistakes).

It all needs to be done by the start of October (otherwise it'll be turning into a Christmas present). That gives me about seven weeks, but it has to be designed, built, painted and finished in that time. I suspect my evenings have just been booked for the next few weeks :-)

Sunday 7 August 2011

Claymore 2011

030 Claymore 2011

I was at  Claymore yesterday, where I spent the morning and a chunk of the afternoon wandering around the show with my brother-in-law.

My to-buy list before the show consisted of a few paints and a hope that figures would leap out at me. Four hours later, I had spent pretty much all my money, and had a number of things that I'll be keeping an eye on as potential future projects.

As usual, no photos, as there will be plenty of those about from other sources. This post is about things I bought, and some of the ideas that have started bubbling around in my mind because of the show.

Paints

Seeing as this was my main reason for going to the show, I shall start with them.

I added some more to my Vallejo collection - gloss and satin varnishes and some light greys.

Foundry continued the white/light grey theme with the Austrian White (67) set. I have the Andrea Miniatures White set, but it's more of a warm (cloth) white, and I was looking for a cold white.

I also picked up some Coat D'Arms from Fighting 15s (eventually - people were buying a lot from the stand so I gave up and went back later). I bought chestnut brown, dwarf flesh and their dark brown "Super Shader". It looks like another dip, so it should come in useful for my skeletons and other figures where I don't need/want to spend hours shading.

Books

I actually picked up a few books this time:

  • Fighting Men of WW2: Axis forces. I have plenty of books of British uniforms, but not really any of German ones. I have some 20mm WW2 Germans to paint at some point, so this should come in useful
  • Pirates: Predators of the Seas. Yet another Pirate book, but looks interesting
  • Battle for Malta - the attacks on the island during WW2
  • Langton Miniatures' Guide to assembling, painting and rigging their 1:1200 Dutch Wars ships. Naval warfare doesn't really do much for me, but the ships of this period are from the Golden Age of Piracy, which does interest me. I have always fancied painting a couple of these ships for display, and I've looked at them in past shows, but never done anything about it. The guy at the stand pretty much talked me out of the idea (the combinations and parts of Langton models looks quite daunting), but I'm going to do some research and order them online
  • Chaos in Carpathia. This is a set of Victorian Vampire hunting rules from BlueMoon. I have plenty of Vampires of that period, but my hunters are all modern. I hope that the rules will be flexible enough to cope (after all, a wooden stake hasn't changed much in 100 years), but I may use this as an excuse to buy and paint some appropriate Victorian figures

Figures

Purchased figures covered a wide range:

  • Pig Iron command squad. Having already got the troopers, heavy weapons and war droids, it was only a matter of time before I completed the set
  • Lead Adventure Jesters. These will join my zombie clown troupe, although the figures aren't sold as zombies
  • Lead Adventure Deep Dive Night 2. This is a deep sea diver and a figure with a large spanner. I didn't buy the figure when I first saw it, as I couldn't think of a use for it. However, at another stand (whose name I forget), they had various sea demons. An image of these guys fighting the deep sea diver immediately popped into my mind, so I picked up the demons and went back and bought the diver. It's a diorama idea, so whether it will ever manifest itself remains to be seen...
  • Some Cthulu Cultists from the same sea demon place, along with a bloated zombie
  • A Gremlin from the same manufacturer. What I really wanted was the base the miniature was on. However, it came with a blank base, and when I asked, I was told the base was from Fenris Games. I've tracked it down, but as they're an ebay store, and I don't have/want an ebay account, I don't think I'll be buying them
  • Urban Mammoth Venom Drake. This was half price, and looks like it'll be suitable for my Demon Apocalypse, so it's in the lead pile
  • Laughing Monk - Bearer of the Light. Bought this from Fighting 15s as I liked the look of the figure. Having looked at it in the cold light of home, however, I'm not so sure...
  • Copplestone Terminators Robots. I had two of them already, so this will add some reinforcements. I have plenty of painted near future figures, so if I ever decide to have a Terminator style game, at least I'll have the figures
  • Warhammer Vampire Counts Necromancer. This is the latest plastic release from GW. I think it's just me, but £8.00 for a single plastic figure seems to be a step too far. For metal or resin it doesn't seem too bad (although still expensive), but for one plastic sprue with no "extras", it just seems wrong. I got it at 10% off, but if it hadn't been at a show, I'm not sure I would have bothered. It's a shame, as it's a nice figure, and quite a few of the others in the range are nice as well. At the moment, however, it's a price point that's going to take me some time to get used to

Things I didn't get

One of the few specific things I went for was Dixon Miniature's "pianist with piano and female singer" set. I need a piano for the Dad's Army diorama and this one looked ideal.

Unfortunately, he brought the entire saloon set, but not the individual packs. It seemed silly to buy the whole lot for one item, so I ordered it online when I got home (not without incident, as clicking the "Add to Shopping Cart" button in Firefox 5 caused it to go into an infinite loop. I eventually managed to buy it using Chrome)

Inspiration for future projects

6mm ancients from Baccus.

I have a couple of painted 6mm armies from Irregular miniatures (Dwarf and some evil type army). I also have two unpainted armies from the same manufacturer (Orc and skeleton).

The main reason they're unpainted is that the casting quality isn't great, and it's sometimes difficult to tell where the flash ends and the figure starts.

The Baccus ones, however, look much cleaner, and I was nearly tempted into buying a 6mm Macedonian army pack. The things that saved me were:

  • the old eyesight is not what it once was
  • I'd have nobody to fight against, so I'd end up having to buy the Persians or Indians as well

Still, this is an area I may revisit, as the idea of a 6mm phalanx on the table is very appealing.

20mm modern British from Britannia

I have some 28mm moderns, although none of them are painted. These ones, however, looked amazing, and again, I was sorely tempted to purchase some. 20mm has the advantage that a lot of plastic kits are available in that scale and I already have some scenery (granted, it's WW2, but a bombed out building looks pretty much the same in every time period)

28mm, however, is more flexible, as I can use the figures with my zombies and other near-future figures (e.g. terminators). This means I won't be investing in 20mm moderns any time soon.

That's the end of my wargame shows for this year. There are still a couple in Scotland, but they're up north, so I don't bother with them.

Now I just have to wait patiently until next May :-)