Bugman's Rangers

I was reading a blog entry at Subject to Stupidity about the old Bugman's Rangers the other week. While the figures on the blog were old, the group he showed was not in fact the first version of the regiment. I think it may have been the second, but I don't have any of those figures.

I do, however, have the originals, bought sometime in the early 80s (the date on the bottom of the figures is 1984). They were the original Regiment of Renown - with RR1 emblazoned proudly on the packaging.

My dwarf army is more or less made up of single figures, so I only ever painted up one of the Rangers and the command group. I used the command group for the phalanx (to be featured in a future post) and I think I may have used another copy of the command group in the main body of the army - I definitely remember painting up the standard bearer a couple of times.

A painted amd unpainted version of the original trooper is shown below

and the figures that comprised the command group

Finally, from the depths of my loft, the original figures from the Regiments of Renown. This is the original packaging, complete with a price tag. The original price had been covered over with a bit of card. I can't remember what I paid for them, but the price under the bit of card was £4.50, or 45p per figure. Not sure how much 45p gets you these days - possibly an arm if you're lucky :-(

At some point I should try and sell them, or auction them off for charity, but for the moment it's back to the loft for the little chaps.

Edit: 26 June 2011

There has been much chatter about these figures (not mine, but the Bugman's Rangers figures in general) over at the Lead Adventure Forum. The main outcome from my own point of view, other than not now being sure how many figures of each type were in the original box, was the (re)discovery of the champion figure. As it turns out, I had him, although just as another figure in the army. While not part of the original Regiment of Renown, he did come out around the same time.

Dwarf Cavalry

I'm just about finished the Mantic skeletons I've been working on. The only things left are shield patterns and bases. I'm not sure what I'm doing with the shields, so I've started the next group of figures while I decide. No pictures of the skeletons yet, but I'll put some up when they're finished.

I'm also close to finishing the 54 mm modern crossbow I've been scratchbuilding. I've been spending a lot of time making the parts, so next up is to build the thing. Once that's done, and assuming it looks okay, I can finally start on the modern vampire hunter figure who'll be holding it. I still have a lot of enthusiasm for this project, which given that the crossbow has taken me a couple of months (weekends only), is hopefully a good sign.

Anyway, this week's photos are some more elements of my Dwarf army - Dwarf cavalry. Dwarves and horses aren't words usually uttered together in the same sentence, and finding the models wasn't easy. These six are all very old, bought and painted in the late 80s, early 90s. I'm not sure any but the Irregular ones are still in production.

The whole unit. Back in the old Citadel adventurer days they did mounted and unmounted versions of the same figure. Some of the cavalry is composed of these figures.

Not sure it shows in the photo, but the left foot on the mounted dwarf is a replacement I had to make as the foot was missing on the original model. One of my earliest greenstuff patches :-)

Likewise

is the mounted version and foot of the adventurer from the Introduction. Now that I come to look at them more closely, there are quite a few differences between them. I'm fairly sure, however, that they're meant to be the same figure, although it has been a while.

I think this one also has a dismounted adventurer, but I can't find the unmounted version of him in my collection. Given that I have most of the dwarves from this period that Citadel produced, this came as a bit of a surprise.

Final Citadel one is Gimli from their old Lord of the Rings set (thanks to stunties.com for confirming that). Again, if there's a foot version, it's likely I have it, but I can't find it at the moment.

The final two are Irregular models. They're one-piece models, i.e. riders are not separate figures.

Eolith Selene

Finished the 54 mm Eloith Miniatures Selene figure recently. I still haven't settled on a base for it yet, but the painted figure is shown below.

Front of the miniature

Better picture of the sword

Lots of space on the cloak for a design, maybe next time :-)

Side view showing the shield. It's rather bright, and might have been better with a less forceful colour than crimson.

Fairly happy with the way the figure went together - all relatively uneventful. I had painted a pattern on the bottom of her cloak, but it looked rubbish (uneven, paint wouldn't flow nicely etc.) so I just painted over it with the base colour. I should probably have tried to weather the cloak, but again, cowardice prevailed. If I'd done the cloak, I'd have to have done the boots, and then the trousers... So I stopped :-)

I took great care not to damage the paint while holding the figure, but I still managed to rub paint off the top of her boots on a couple of occasions. It's looking like becoming an occupational hazard with the larger scale :-(

Once finished I looked at it under the Evil Magnifying Lamp of Doom(tm). This is a daylight fluorescent magnifying lamp that delights in finding mistakes. It immediately spotted some paint under her chin and a couple of other spills. It also has the very annoying habit of doing away with all my smooth transitions, leaving everything harsh and chalky.

I'm struggling to decide on a base for the figure. I bought a Gothic arch, but it's too big and completely overwhelms the figure.

I then considered (and am still considering) building something with the Hirst Arts molds I have. That's also stalled, however, as my previous experiment with Hirst Arts' stuff failed for a couple of reasons: I couldn't cast the blocks evenly, so when trying to build something, the tiny differences in height were magnified; painting them was difficult, as trying to cover all the plaster took forever. Note that these were my problems, and many people have created whole dungeons and layouts with the molds, so it's nothing to do with them.

My current thought is a VoodooWorx pedestal that I bought. I like it, with one slight caveat (anyone spotting a trend yet). The problem is that the pedestal is plain, and I'd like some decoration at the bottom so it isn't quite so "clean". If this was a non-pedestal base, it'd be perfect.

I've also been considering making a base from scratch. This would involve rolling out some Milliput (or similar), and cutting the paving stones into it before it cures. I have a couple of bases I'm thinking about making for other figures (again, can't quite find the ones I want), so this approach is more likely to be tried than the Hirst Arts route.

Still, there's no hurry to complete the figure, other than wanting to use the vice that's holding it for another figure, so I'll get there eventually.

Recently finished Zombie Hunters

Finished these guys a couple of weeks ago. They're a selection of figures, including Studio Miniatures, Reaper, Hasslefree and one figure I can't remember who/where I got him (it may have been at a wargame show)

They took quite a while, as I decided to paint them "properly". This included multiple shading and highlighting levels and all the modern stuff. Overall, I'm quite pleased with them, so I suppose the extra time and effort was worth it.

Studio Miniatures Wizard of Oz survivors group. I'm not quite sure why I split them across two different base types, but I don't think it matters too much. Some nice fun figures that will hopefully do well on the tabletop.

Reaper figure (Berkeley). Really enjoyed painting this one. I think her top should have been a different colour, but other than that I'm happy with it. I even added dirt and blood to the trousers and top, which is quite unusual for me. Annoyingly, they don't show up well on the photo :-(

Two Hasslefree figures (Jess and Morgan) next to the Reaper figure. They're quite demanding to paint, as the details are very fine. Makes a nice change to work with realistically scaled weapons, heads and hands (*cough* Games Workshop *cough* :-) ).

I'm not sure if the trousers on Jess are jeans or chaps. I painted them up as chaps, but have seen other versions treating them as jeans. The colour is also far more yellow than I had intended. I used Foundry Buff, but I really need to tone it down if I use it again. I think the Vallejo USA tan that I used on the shotgun guy's jacket (below), would have been a better choice.

closeup of the Hasslefree Morgan figure armed with a pistol

Not sure where I got him, but he painted up well enough. The jacket took about five or six coats before I was happy with the coverage. I tried stubble on both him and the scarecrow figure from the first group. I think it looks okay (looks less harsh on the figure than the photo suggests), so it'll be getting used on more figures.

I now have quite a backlog of completed miniatures waiting to be varnished. Hopefully the warmer weather will let me back into the loft and I'll get them done.

Rebasing Figures

For many many (many) years now, I've based my figures using the same simple technique:

1. cover base with textured paint
2. paint base green for countryside or red-brown for town/city

Citadel dwarf on cardboard base covered with textured paint

Modern post apocalypse figure on metal washer covered with textured paint

I've never been too crazy about this, but I tend to view the base as just an irritation that has to be addressed once the figure's been painted, rather than anything more. Recently, however, my Pirates and Zombie figures have forced me to reconsider this approach.

I reckon the towns of the apocalypse will be messy, so muddy textured bases still seem appropriate. Having bought some pavement bases for my most recent figures, however, I definitely prefer them.

Latest zombie survivor on pavement base

This brings me to something of a dilemma: Should I leave my old figures on the textured paint bases, or should I rebase them on shiny new pavement/rubble strewn bases?

Part of me says to rebase. Even though a specific base type "locks" the figure in (pavement bases will look a bit silly indoors or in the countryside, whereas a generic base, while not really fitting in anywhere, also doesn't look completely out of place anywhere), it does ground (sorry) the figure. There's also scope for extra touches on the bases - litter etc., that just add that bit more.

However, the big question is: How do I remove all the gunk that's on the base without damaging the figure? There are two types of base I use: slottabases for plastics or figures that came with tabs, and washers for figures with integral bases.

Slotta bases

Metal figures are glued to the base with everything from Bostik to two-part expoxy. Clippers, however, will remove the base and getting rid of the tab shouldn't be too much trouble. Hopefully this can be done without damaging the figure too much (ideally not at all). The liberated figure would then just need pinned to a new base.

Plastic figures are just glued directly to the slottabase. I'm not sure it will be possible to remove them without damaging the paint. It may even be difficult to remove them without damaging the model, which would be A Bad Thing. I may have to accept that some of these figures will just have to remain on generic bases...

Integral metal bases

The bigger challenge is those figures with integral bases. When I based the pirates I took clippers to their bases and then filed the feet flat. I noticed, however, that the legs of the figures moved apart when I cut into the base. I suspect doing this on a painted figure would lead to cracked paint - definitely not the result I'm hoping for. My current thinking is to clip off the edges of the base, then file the rest of the base away. I'm going to try this manually first, but hopefully a drill with a grinding stone can be used to take out the bulk of the base before finishing it off with a file.

Another possibility for integral bases is to remove the textured paint, then create a new rubble strewn base around it. This would be done using filler, sand, plasticard for beams and corrugated iron etc. While this won't be appropriate for all the figures, it does at least leave the figure on its base, and on the washer, but should make the base much more interesting.

I've set up a test figure (shown below) by gluing it to a washer and adding textured paint to it. I'll leave it for a few days to dry thoroughly, then see what happens when I try and remove it. I shall report back on the results.

Scale Calculator Update

Just a quick post, as I was busy last weekend and haven't had a chance to photograph anything for a while.

I've updated the Scale Calculator program from last time.

It occurred to me that we talk about "28 mm", "54 mm" etc., rather than the corresponding 1:n scale, so I added a drop down list to each of the scale boxes with a selection of the most common scales. I also added some train scales, as some of the scenery can be useful in wargaming.

Selecting a value from the list populates the scale box with the corresponding 1:n scale. Other scales can be entered as before, but hopefully this will be useful. One thing I found during my searching is that some scales "round down" in common use. 15 mm, for example, is 1:122. There seem to be a lot of references to it as 1:100, however, so I've added both to the list. There also seem to be three versions of O scale for trains, which was news to me.

I've updated the help text and tidied the layout up a bit. I also managed to find out how to stop the iPhone from treating certain numbers as phone numbers and underlining them. I wouldn't have minded so much, but it seemed fairly random. Anyway, they're all stomped out now.

New screen layout

Hopefully this program is finished, at least for a while, and I'll get back to figure pictures next week. I'm just about finished my zombie hunters (finally) and may have found a suitable base for my 54 mm Selene from Eolith Miniatures. The base is from Voodooworx, so I'll see how it goes. I had expected to have to try and build something for that figure, so hopefully I won't have to now :-)

Did a small spot of impluse buying a couple of weeks ago. I was walking past my local SF bookshop when I spotted the Steampunk Modeller book from Sci-fi and fantasy modeller. I'm not a big fan of steampunk, but I had a quick look though it and decided to buy it (not the most difficult decision I've made this year :-)). It looks quite good, and there are plenty of techniques to explore, even if most of the models don't really do anything for me.

The only other thing happening at the moment is some cleaning and preparation of ten Mantic skeletons. I bought a whole lot of them at the end of last year, so I'm doing a small group to try to decide on colours and a general look for the army. I have some old Citadel and Grenadier skeletons, but they're in a heavily drybrushed style, so I'm probably going to do something different.

Scale Calculator

I did some sculpting a few years ago. I never produced anything I was particularly happy with, but two or three of the figures I made were ones I would have bought had I seen them in a shop, so that's always a good sign (alternatively it's similar to someone laughing at their own jokes, which is kindof sad). Anyway, I stopped largely because I ran out of inspiration (that's my excuse and I'm sticking to it). Recently, however, inspiration has returned, and I'm doing some background work on what will hopefully become a fully fledged project.

The plan is to do a 54 mm vampire hunter type person. I plan to use a precast head and feet (and possibly hands), as those are the parts I have most trouble with. I've had a modern military type figure awaiting conversion for some years, but the amount of work I'd have to do on it has always put me off slightly. The main stumbling block, however, has been my inability to find a 54 mm scale modern crossbow for the figure. Scratch-building has never been one of my strong suits, so the project has languished...

For whatever reason I've decided that, as I want to sculpt the figure, I should at least try and scratch-build the weapon. To this end I've spent the last few weeks finding pictures and getting details of crossbows (not from work, could be dodgy explaining that in my surfing history :-) If all goes well, I plan to try a shotgun and chainsaw next, so definitely not suitable for work!).

After finding quite a variety of measurements - bolts ranging from 14 inches to 24 inches, and crossbows up to 36 inches long, I settled on a more modest bolt size, giving an overall real life crossbow length of 28 inches. However, I now had to convert and tweak the real world measurements to 54 mm (1:32) scale. I did some of these by hand on the calculator - convert inches to mm, then scale, but reckoned this would be better done by computer.

A little while later, I had constructed a simple online program, published via googleapps. I wanted something that I could keep beside me, so it had to be accessible from my iPhone, rather than having to drag a laptop out. Some Googling later and I found the magic html tags to size my app correctly for mobile devices. It is still usable from a full size browser, just looks quite boring...

Scale Size Calculator

To use it, you just put in the actual size, select the units and new scale, then press calculate. It will also convert between scales, so you can enter, e.g. 2 mm in 1:65, select output scale of 1:32 and it'll tell you how big the part is in 1:32 (4.063 mm if you're interested). This should allow measurements to be scaled up (or down) fairly easily.

I posted this in the Lead Adventure Forum and someone suggested it would be handy to know what real life size a figure is, given its scale size, e.g. if a figure is 28 mm tall and would be 6 feet (72 inches) in real life, what scale is the figure (1:65).

I added this to the program, as shown below. Note also that I've added some help text since I took the screenshots, just in case anyone has trouble understanding the form.

Figure Scale Calculator

If you want to try them, these programs can be accessed at Scale Size Calculator and Figure Scale Calculator respectively.

Being really impatient, the thought of having to wait for the results over wifi prompted me to create an offline version. I have a Dell Axim lying about (bought it a while back, and have never really found a use for it. It just lies in the cupboard and I dig it out and recharge the battery every six months), so I have created a Windows Mobile 5 version of the software (apologies for the screenshots, they're resized clippings from the device emulator with the development SDK). I don't have a way to link to the program for upload, so not really sure why I mentioned this :-)

Scale Size Calculator

Figure Scale Calculator

I used the online version when sizing the crossbow, and I plan to use it for the other models. Normally, after I write a program, I never use it again, so hopefully this will make a nice change :-)

The actual adventures in scratch-building will be the subject of a future post, assuming I produce something usable...